Surface Mount or T-Grid. 2x2 or 1x4. One Panel Does Both.
A 39mm low-profile surface-mount panel with built-in driver that also drops into T-grid ceilings. 9-in-1 DIP switch (20/30/40W × 3500K/4000K/5000K), 133 lm/W, ETL + DLC certified. When every room has a different ceiling type, carry one fixture that handles all of them.
Surface Mount AND T-Grid Compatible — One Fixture, Two Ceiling Types
Some rooms have drop ceilings, others have drywall. This panel mounts flush on any surface at 39mm profile, or drops into standard T-grid. Carry one SKU for the entire building instead of separate surface-mount and recessed models.
2x2 and 1x4 Options — Both Ceiling Grid Standards Covered
2x2 for standard office grids, 1x4 for linear corridor grids. Same product family, same performance, same aesthetics — just different form factors for different grid configurations.
Built-In Driver = No External Driver Box
The driver is integrated into the 39mm housing — no separate driver box to mount above the ceiling, no extra connection point to fail, no fumbling with remote drivers in tight plenum spaces.
9-in-1 DIP Switch Eliminates SKU Proliferation
Three wattage steps (20/30/40W) and three CCT options (3500K/4000K/5000K) via simple DIP switch. Purchase managers order one part number. Electricians configure each fixture to match its specific room.
133 lm/W with ETL + DLC Certification
Industry-leading efficiency for the surface-mount category, with dual certification for code compliance and utility rebate eligibility. Premium performance without premium complications.
