No Can. No Housing. No Callback. Just Cut the Hole and Connect.
A canless 6-inch downlight that installs in minutes — no recessed housing, no thermal box, IC and non-IC compatible. 90+ CRI, 5CCT selectable, wet-location rated, with flicker-free Triac dimming down to 10%. The retrofit fixture that eliminates the retrofit headaches.
Canless Design = Fastest Install in the Category
No housing to pre-install, no thermal can to wrestle into the joist bay. Run the wire, cut the hole, plug in the quick-connect, and push the fixture up. Each fixture saves 10–15 minutes vs. traditional can installs.
IC and Non-IC Compatible — Every Ceiling Is the Right Ceiling
Whether the space has insulation contact or open joist bays, this fixture is rated for both. No need to identify ceiling type before ordering — one SKU handles all conditions.
90+ CRI Eliminates the 'Everything Looks Gray' Complaint
Tenants and building occupants notice when lighting washes out colors. At CRI >90, paint colors, furniture, and food look the way they're supposed to — reducing the callbacks that start with 'the lighting feels wrong.'
Wet Location Rated — From Bathroom to Covered Patio
Install over showers, in covered exterior walkways, and in commercial restrooms without a separate damp-rated fixture. One rating covers the whole building.
Flicker-Free Dimming Prevents Headache Complaints
Triac dimming from 10% to 100% with zero visible flicker. In offices and healthcare settings where occupants spend 8+ hours under the lights, flicker-free operation isn't a luxury — it's a requirement.
