Pathway Bollard That Survives Landscaping Crews and Northeast Winters
The A-B series LED bollard light delivers 10W–25W of selectable output with IK08 impact resistance, IP65 weatherproofing, and 0-10V dimming — built for the real-world abuse that commercial landscape lighting endures.
IK08 Impact Protection — Because Landscapers Hit Things
Commercial bollards get struck by mowers, snow plows, hand trucks, and car bumpers. IK08-rated construction handles 5 joules of impact — equivalent to a 1.7kg weight dropped from 300mm. The bollard survives what kills cheap landscape fixtures within their first season.
10W/18W/25W Selectable — One Bollard for Every Spacing
Tight 15-foot spacing along a building entry? Use 10W. Wide 30-foot spacing along a parking lot pathway? Use 25W. Adjustable wattage with 3CCT selection (3000K/4000K/5000K) means contractors order one SKU and tune each bollard to its location at install.
0-10V Dimming — Save Energy After Midnight
Connect to a building automation system or standalone dimmer to reduce output during low-traffic hours. A property running bollards at 50% from midnight to 5 AM saves proportional energy every night, compounding savings over the 50,000+ hour fixture life.
143° Beam — Lights the Full Walkway from a 42-Inch Post
The wide 143° beam distribution pushes light outward across pathways rather than straight down. This means broader coverage between bollards, fewer units needed per run, and more uniform foot-candle levels across the walking surface.
IP65 + 120–277V — Weather and Voltage Proof
Sealed IP65 against rain, irrigation spray, and dust. Universal 120–277V input handles any commercial landscape lighting circuit. Available in Bronze and Black to match building and landscape design palettes.